480 804 1227
You Are Here: Home > Educational Equipment > Laser > Educational Lasers > He-Ne Lab Laser ML 810

He-Ne Lab Laser 0.8 mW / Class II
Most popular laser for classroom or student lab

The ML 800 series of lasers is a tried and true laser family originally designed and manufactured by Metrologic. We are very proud at Industrial Fiber Optics to continue producing this outstanding line of lasers, incorporating our own improvements. Designed with a sturdy metal enclosure and along the lines of classic laser design with integrated power supply this laser is an excellent choice for an industrial or educational application.

With output power of .8 mW, the ML 810 is our most popular model in the 800 series for any engineering or educational lab. This laser has a virtually infinite shelf life, providing 20,000 hours of continuous operation. Its beam is visible in normally lit or semi-dark rooms when conducting most optical experiments.

In 2007 we redesigned the internal circuitry in this laser to include the latest in power supply design to further improve efficiency and reliability.

  He-Ne Lab Laser

Part Number: ML 810 
Price: $400.00
Operators Manual
Quantity


The ML 800 laser series was part of Metrologic Instruments' product line prior to November 2004.

Other products for use with this laser:



Laser Optics Lab Modern Optics Kit



Features:

  • Hard-seal laser tubes for long life
  • Shock-resistant mountings
  • Durable extruded aluminum housing that protects the laser tube and power supply components
  • Two-year limited warranty
  • Solid-state integrated power supply mounted on durable printed circuit board
  • Standard 1/4-inch threaded hole for tripod or optical bench mounting
  • Mechanical slide shutter over front aperture to block laser beam without having to turn off the power supply (as required by CDRH)
  • Rear end cap with power switch indicator lamps, fuse holder and line cord with 3-prong grounded plug
  • Full-length rubber strips on the underside to prevent scratching and slipping on polished surfaces
  • Labels and safety features to meet all U.S. CDRH regulations
  • Power requirements: 105 - 125 VAC 60 Hz
  • 220 VAC upon request. Click Here to see what is available. Then select the part number required.

Suitable for experiments such as:

  • Viewing refraction in optical materials
  • Angle of incidence and reflection on mirror surfaces
  • Tyndall's light-guiding-in-water experiments
  • Scattering of light by small suspended particles
  • Critical angle determination in materials
  • Convergence and divergence in optical lenses

LASER CLASSIFICATIONS

All manufacturers of lasers used in the United States, must conform to regulations administered by the Center for Devices and Radiological Health (CDRH), a branch of the U.S. Department of Health and Human Services. CDRH categorizes lasers as follows:

 Class 1

A laser or laser system which does not present a hazard to skin or eyes for any wavelength or exposure time. Exposure varies with wavelength. For ultraviolet, .2 to .4m exposure is less than from .8 or near IR, the exposure is < 200w. Consult CDRH regulations for specific information.

 Class 2

Any visible laser with an output less than 1 mW of power. Warning label requirements yellow caution label stating maximum output of 1 mW. Generally used as classroom lab lasers, supermarket scanners and laser pointers.

 Class 3a

Any visible laser with an output over 1 mW of power with a maximum output of 5 mW of power. Warning label requirements red danger label stating maximum output of 5 mW. Also used as classroom lab lasers, in holography, laser pointers, leveling instruments, measuring devices and alignment equipment.

 Class 3b

Any laser with an output over 5 mW of power with a maximum output of 500 mW of power and all invisible lasers with an output up to 400 mW. Warning label requirements red danger label stating maximum output. These lasers also require a key switch for operation and a 3.5-second delay when the laser is turned on. Used in many of the same applications as the Class IIIa when more power is required.

 Class 4

Any laser with an output over 500 mW of power. Warning label requirements red danger label stating maximum output. These lasers are primarily used in industrial applications such as tooling, machining, cutting and welding. Most medical laser applications also require these high-powered lasers.


 Specifications
 CDRH Classification  Class II
 Polarization  Random
 Laser Emission Color  Red
 Laser Mode  TEM00
 Operating  Unit  Value
 Input Voltage  V 110
 Input Current  mA 60
 Wavelength  nm  632.8
 Optical Output Power, Nominal  mW  0.8 mW /
 Power, (min/max)  mW  .60 / .95
 Beam Diameter  mm  0.47
 Beam Divergence  mRad  1.70
 Digital Modulation  MHz n/a
 Analog Modulation  Hz to MHz n/a
 Mechanical  Unit  Value
 Operating Temperature  ° C  0 - 50
 Housing  cm  23.9 x 7.2 x 7.4