Connector-less design for industry-standard POF cable w retention nut

Connector-less design for industry-standard POF cable w retention nut
Replaces the IF CS4

PN: 51 0242
Price (each)

 1 to 49 $ 5.92 
 50 to 99 $ 5.34 
 100 to 249 $ 4.74 
 250 to 499 $ 4.44 
 500 to 999 $ 4.15 
 1,000 to 4,999 $ 3.85 
 5,000+ $ 3.55 

Quantity  

For use with plastic optical fiber cable with a 2.2 mm OD jacket. Utilizes a collet/cinch design for holding the fiber cable like our highly successful LED and photodetector line. This mating sleeve is designed to mate 2.2 mm OD jackets without stripping jacket from fiber ends.

Includes retention nut for panel or bulkhead installation.

Manufacturer: Industrial Fiber Optics

Processing Tools:
IF FC1 Fiber cutter block for creating clean cuts



  ✅  RoHS

PDF iconPDF

STEP iconSTEP



  Specifications
Ferrule N/A
Ferrule Holder
Retention Nut Stainless Steel
Crimp No
Epoxy No
Termination/Polishing Cleave or polish before insertion
Number of Fibers 1
 
Value Unit
Optical Fiber Size N/A µm
Jacket Diameter 2.2 mm
Bore Diameter - µm
Bore Diameter Tolerance - µm
Concentricity µm
Approximate Weight 5 g
Operating Temperature -40 ~ 85 ° C
Typical Loss dB

Copyright 2000 - 2024, All Rights Reserved Industrial Fiber Optics