Lightera Connector, ST crimp and cleave - BP05065-41
Lightera fiber cable ST Connector connectors use an easy crimp and cleave termination process that eliminates the need for epoxies, curing ovens, or time-consuming polishing. This facilitates making quick (typically less than 2-minute) connections that are compatible with standard ST Connector mating connectors and device mounts.
Manufacturer: Lightera
Processing Tools:Crimp and Cleave Termination Kit: DT03732-35
✅ RoHS
Specifications
| Ferrule | Stainless | ||||
| Ferrule Holder | |||||
| Retention Nut | Nickel-Plated Zinc | ||||
| Crimp |
Custom |
||||
| Epoxy |
No |
||||
| Termination/Polishing |
Cleave |
||||
| Number of Fibers | 1 | ||||
| Value | Unit | ||||
| Optical Fiber Size | .430 | µm | |||
| Jacket Diameter | 1.8 | mm | |||
| Bore Diameter | - | µm | |||
| Bore Diameter Tolerance | - | µm | |||
| Concentricity | ≤ | µm | |||
| Approximate Weight | 6 | g | |||
| Operating Temperature | -40 ~ 80 | ° C | |||
| Typical Loss | 1 | dB | |||
Industrial Fiber Optics, Inc
Mountain Standard Time